What is the main difference between the Rubbit e-Foamer and the Rubbit manual foamer?
As the name suggests, the electric foamer runs on a battery and doesn't require manual air pressure pumping like the manual foamer.
Will the Rubbit e-Foamer give a better cleaning result?
Not necessarily. The foam produced is essentially the same with only a slight variation in concentration. However, in terms of ease of use, it is more convenient to spray foam effortlessly with the push of a button.
How often does the Rubbit e-Foamer need to be charged?
A full charge, indicated by all three LED lights turning green, will be enough for at least 10 complete washes, using up all the liquid in the container each time. However, if the foamer is left unused for several months, the battery may discharge on its own and require a charge before the next use.
How much water and Rubbit Foam 2.0 should I mix in the Rubbit e-Foamer?
For every liter of water (34 oz), use 25 ml of Rubbit Foam (1 oz). Most family-sized cars will require 2 liters of water (68 oz) and 50 ml of foam (2 oz). Use the measuring cup provided in the box to ensure the correct ratio.
If I have leftover liquid in the container after use, can I save it for the next wash?
Yes, but it’s not recommended. Foam left diluted in the container may be less effective for the next wash. For the best results, we recommend mixing fresh water and foam for each use.
Where should I store the Rubbit e-Foamer after use?
As long as the temperature where you are is between 59-77°F (15-25°C), it’s fine to leave the kit in the car. However, if you live in an area with extreme heat or cold, it’s recommended to store the kit indoors in a shaded place.
Does the temperature of the water mixed with Rubbit Foam 2.0 matter?
No, standard tap water at room temperature will work perfectly.
Can the Rubbit e-Foamer be used with other products or for different purposes?
Yes, but it’s important to thoroughly rinse the container and run the foamer with clean water to flush the internal tubes and system before using it with Rubbit again.
How do I operate Rubbit e-Foamer?
A single press and hold will release foam until the button is released. Two quick presses within half a second will activate continuous spraying, which can be stopped with another press. Watch our how to video on YouTube: https://youtu.be/X1tE9ch3L3Y